7216 Iron or non-alloy steel, angles, shapes and sections

Subcategories of 7216 Iron or non-alloy steel, angles, shapes and sections

• 721610Iron or non-alloy steel; U, I or H sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm
• 721621Iron or non-alloy steel; L sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm
• 721622Iron or non-alloy steel; T sections, hot-rolled, hot-drawn or extruded, of a height less than 80mm
• 721631Iron or non-alloy steel; U sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
• 721632Iron or non-alloy steel; I sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
• 721633Iron or non-alloy steel; H sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
• 721640Iron or non-alloy steel; L or T sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
• 721650Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, hot-rolled, hot-drawn or extruded
• 721661Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, obtained from flat-rolled products
• 721669Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, (not obtained from flat-rolled products)
• 721691Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, cold-formed or cold-finished, from flat-rolled products
• 721699Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216

Other HS 2022 codes under 7216 Iron or non-alloy steel, angles, shapes and sections

• 7201Pig iron and spiegeleisen in pigs, blocks or other primary forms
• 7202Ferro-alloys
• 7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or the like; iron having a minimum purity of 99.94%, in lumps, pellets or similar forms
• 7204Ferrous waste and scrap; remelting scrap ingots of iron or steel
• 7205Granules and powders, of pig iron, spiegeleisen, iron or steel
• 7206Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading no. 7203)
• 7207Iron or non-alloy steel; semi-finished products thereof
• 7208Iron or non-alloy steel; flat-rolled products of a width of 600mm or more, hot-rolled, not clad, plated or coated
• 7209Iron or non-alloy steel; flat-rolled products, width 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated
• 7210Iron or non-alloy steel; flat-rolled products, width 600mm or more, clad, plated or coated
• 7211Iron or non-alloy steel; flat-rolled products, width less than 600mm, not clad, plated or coated
• 7212Iron or non-alloy steel; flat-rolled products, width less than 600mm, clad, plated or coated
• 7213Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils
• 7214Iron or non-alloy steel; bars and rods, not further worked than forged, hot-rolled, hot drawn or hot-extruded, but including those twisted after rolling
• 7215Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72
• 7217Wire of iron or non-alloy steel
• 7218Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
• 7219Stainless steel; flat-rolled products of width of 600mm or more
• 7220Stainless steel; flat-rolled products of width less than 600mm
• 7221Stainless steel bars and rods, hot-rolled, in irregularly wound coils
• 7222Stainless steel bars and rods, angles, shapes and sections
• 7223Stainless steel wire
• 7224Alloy steel in ingots or other primary forms, semi-finished products of other alloy steel
• 7225Alloy steel flat-rolled products, of a width 600mm or more
• 7226Alloy steel flat-rolled products, of a width of less than 600mm
• 7227Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils
• 7228Alloy steel bars, rods, shapes and sections; hollow drill bars and rods, of alloy or non-alloy steel
• 7229Wire of other alloy steel

Frequently asked questions

What is HS 2022 7216?

HS 2022 7216 is "Iron or non-alloy steel, angles, shapes and sections". HS 2022 code 7216 covers "Iron or non-alloy steel, angles, shapes and sections" at level 3 of the HS 2022 hierarchy.

What does HS 2022 7216 include?

7216 Iron or non-alloy steel, angles, shapes and sections contains 12 direct subcategories: 721610 Iron or non-alloy steel; U, I or H sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm; 721621 Iron or non-alloy steel; L sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm; 721622 Iron or non-alloy steel; T sections, hot-rolled, hot-drawn or extruded, of a height less than 80mm; 721631 Iron or non-alloy steel; U sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more; 721632 Iron or non-alloy steel; I sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more; 721633 Iron or non-alloy steel; H sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more; and more.

What is the parent category of 7216?

7216 Iron or non-alloy steel, angles, shapes and sections sits under 7216 Iron or non-alloy steel, angles, shapes and sections in the HS 2022 hierarchy.